Características
- Four components combine for easy data... || kba1
-
Four components combine for easy data integration
The IntelliBridge System is comprised of four components. The EC5 ID Module connect POC devices to the EC40/80 Hub, which provides connectivity to the hospital LAN. The SC50 Device Interfacing Engine collections patient data from the hubs, converts HL7 format and transmits to the HIS. The Management Console allows support staff to configure and troubleshoot the system. - Plug-and-play for ease of use || kba1
-
Plug-and-play for ease of use
IntelliBridge System EC 5 ID Module provides plug-and-play connectivity between a POC device and an IntelliBridge EC 40/80 Hub. The in-line module is equipped with a device-specific RS-232 connector that connects to the serial data output port on a supported patient care device. - Seamless connectivity, smooth data tr... || kba1
-
Seamless connectivity, smooth data transmission
The EC40/80 Hub can store up to 25 device drivers to facilitate plug-and-play connectivity of patient-care devices. The hub aggregates data from connected patient-care devices and transmits this data to the IntelliBridge SC50 device interfacing engine. - Data readily converted to HL7 format || kba1
-
Data readily converted to HL7 format
The IntelliBridge System’s SC50 device interfacting engine is a data aggregation and translation application that runs on a customer supplied host computer connected to the hospital LAN. It collects patient data from the connected E40/80 Hubs, converts this data to the widely accepted HL7 standard, and transmits the HL7 patient data to the HIS or ICCA - Single management console enhances tr... || kba1
-
Single management console enhances troubleshooting
IntelliBridge System Management Console application can be used by support personnel to configure and troubleshoot the entire IntelliBridge System. The Managmeent Console can be installed either on the SC50 host computer or on a remote conputer that has access to the hospital LAN for easy access.
Four components combine for easy data integration
The IntelliBridge System is comprised of four components. The EC5 ID Module connect POC devices to the EC40/80 Hub, which provides connectivity to the hospital LAN. The SC50 Device Interfacing Engine collections patient data from the hubs, converts HL7 format and transmits to the HIS. The Management Console allows support staff to configure and troubleshoot the system.
Four components combine for easy data integration
The IntelliBridge System is comprised of four components. The EC5 ID Module connect POC devices to the EC40/80 Hub, which provides connectivity to the hospital LAN. The SC50 Device Interfacing Engine collections patient data from the hubs, converts HL7 format and transmits to the HIS. The Management Console allows support staff to configure and troubleshoot the system.
Plug-and-play for ease of use
IntelliBridge System EC 5 ID Module provides plug-and-play connectivity between a POC device and an IntelliBridge EC 40/80 Hub. The in-line module is equipped with a device-specific RS-232 connector that connects to the serial data output port on a supported patient care device.
Plug-and-play for ease of use
IntelliBridge System EC 5 ID Module provides plug-and-play connectivity between a POC device and an IntelliBridge EC 40/80 Hub. The in-line module is equipped with a device-specific RS-232 connector that connects to the serial data output port on a supported patient care device.
Seamless connectivity, smooth data transmission
The EC40/80 Hub can store up to 25 device drivers to facilitate plug-and-play connectivity of patient-care devices. The hub aggregates data from connected patient-care devices and transmits this data to the IntelliBridge SC50 device interfacing engine.
Seamless connectivity, smooth data transmission
The EC40/80 Hub can store up to 25 device drivers to facilitate plug-and-play connectivity of patient-care devices. The hub aggregates data from connected patient-care devices and transmits this data to the IntelliBridge SC50 device interfacing engine.
Data readily converted to HL7 format
The IntelliBridge System’s SC50 device interfacting engine is a data aggregation and translation application that runs on a customer supplied host computer connected to the hospital LAN. It collects patient data from the connected E40/80 Hubs, converts this data to the widely accepted HL7 standard, and transmits the HL7 patient data to the HIS or ICCA
Data readily converted to HL7 format
The IntelliBridge System’s SC50 device interfacting engine is a data aggregation and translation application that runs on a customer supplied host computer connected to the hospital LAN. It collects patient data from the connected E40/80 Hubs, converts this data to the widely accepted HL7 standard, and transmits the HL7 patient data to the HIS or ICCA
Single management console enhances troubleshooting
IntelliBridge System Management Console application can be used by support personnel to configure and troubleshoot the entire IntelliBridge System. The Managmeent Console can be installed either on the SC50 host computer or on a remote conputer that has access to the hospital LAN for easy access.
Single management console enhances troubleshooting
IntelliBridge System Management Console application can be used by support personnel to configure and troubleshoot the entire IntelliBridge System. The Managmeent Console can be installed either on the SC50 host computer or on a remote conputer that has access to the hospital LAN for easy access.
- Four components combine for easy data... || kba1
- Plug-and-play for ease of use || kba1
- Seamless connectivity, smooth data tr... || kba1
- Data readily converted to HL7 format || kba1
Veja todos os recursos
- Four components combine for easy data... || kba1
-
Four components combine for easy data integration
The IntelliBridge System is comprised of four components. The EC5 ID Module connect POC devices to the EC40/80 Hub, which provides connectivity to the hospital LAN. The SC50 Device Interfacing Engine collections patient data from the hubs, converts HL7 format and transmits to the HIS. The Management Console allows support staff to configure and troubleshoot the system. - Plug-and-play for ease of use || kba1
-
Plug-and-play for ease of use
IntelliBridge System EC 5 ID Module provides plug-and-play connectivity between a POC device and an IntelliBridge EC 40/80 Hub. The in-line module is equipped with a device-specific RS-232 connector that connects to the serial data output port on a supported patient care device. - Seamless connectivity, smooth data tr... || kba1
-
Seamless connectivity, smooth data transmission
The EC40/80 Hub can store up to 25 device drivers to facilitate plug-and-play connectivity of patient-care devices. The hub aggregates data from connected patient-care devices and transmits this data to the IntelliBridge SC50 device interfacing engine. - Data readily converted to HL7 format || kba1
-
Data readily converted to HL7 format
The IntelliBridge System’s SC50 device interfacting engine is a data aggregation and translation application that runs on a customer supplied host computer connected to the hospital LAN. It collects patient data from the connected E40/80 Hubs, converts this data to the widely accepted HL7 standard, and transmits the HL7 patient data to the HIS or ICCA - Single management console enhances tr... || kba1
-
Single management console enhances troubleshooting
IntelliBridge System Management Console application can be used by support personnel to configure and troubleshoot the entire IntelliBridge System. The Managmeent Console can be installed either on the SC50 host computer or on a remote conputer that has access to the hospital LAN for easy access.
Four components combine for easy data integration
The IntelliBridge System is comprised of four components. The EC5 ID Module connect POC devices to the EC40/80 Hub, which provides connectivity to the hospital LAN. The SC50 Device Interfacing Engine collections patient data from the hubs, converts HL7 format and transmits to the HIS. The Management Console allows support staff to configure and troubleshoot the system.
Four components combine for easy data integration
The IntelliBridge System is comprised of four components. The EC5 ID Module connect POC devices to the EC40/80 Hub, which provides connectivity to the hospital LAN. The SC50 Device Interfacing Engine collections patient data from the hubs, converts HL7 format and transmits to the HIS. The Management Console allows support staff to configure and troubleshoot the system.
Plug-and-play for ease of use
IntelliBridge System EC 5 ID Module provides plug-and-play connectivity between a POC device and an IntelliBridge EC 40/80 Hub. The in-line module is equipped with a device-specific RS-232 connector that connects to the serial data output port on a supported patient care device.
Plug-and-play for ease of use
IntelliBridge System EC 5 ID Module provides plug-and-play connectivity between a POC device and an IntelliBridge EC 40/80 Hub. The in-line module is equipped with a device-specific RS-232 connector that connects to the serial data output port on a supported patient care device.
Seamless connectivity, smooth data transmission
The EC40/80 Hub can store up to 25 device drivers to facilitate plug-and-play connectivity of patient-care devices. The hub aggregates data from connected patient-care devices and transmits this data to the IntelliBridge SC50 device interfacing engine.
Seamless connectivity, smooth data transmission
The EC40/80 Hub can store up to 25 device drivers to facilitate plug-and-play connectivity of patient-care devices. The hub aggregates data from connected patient-care devices and transmits this data to the IntelliBridge SC50 device interfacing engine.
Data readily converted to HL7 format
The IntelliBridge System’s SC50 device interfacting engine is a data aggregation and translation application that runs on a customer supplied host computer connected to the hospital LAN. It collects patient data from the connected E40/80 Hubs, converts this data to the widely accepted HL7 standard, and transmits the HL7 patient data to the HIS or ICCA
Data readily converted to HL7 format
The IntelliBridge System’s SC50 device interfacting engine is a data aggregation and translation application that runs on a customer supplied host computer connected to the hospital LAN. It collects patient data from the connected E40/80 Hubs, converts this data to the widely accepted HL7 standard, and transmits the HL7 patient data to the HIS or ICCA
Single management console enhances troubleshooting
IntelliBridge System Management Console application can be used by support personnel to configure and troubleshoot the entire IntelliBridge System. The Managmeent Console can be installed either on the SC50 host computer or on a remote conputer that has access to the hospital LAN for easy access.
Single management console enhances troubleshooting
IntelliBridge System Management Console application can be used by support personnel to configure and troubleshoot the entire IntelliBridge System. The Managmeent Console can be installed either on the SC50 host computer or on a remote conputer that has access to the hospital LAN for easy access.
¿Busca documentación sobre nuestros productos?
¿Buscas nuestra tienda online de salud para profesionales?
Produtos relacionados
Alternative products
-
IntelliBridge EC10
- Your link to a comprehensive patient overview
- Consolidated information enhances patient management
- Compatible with devices from major manufacturers
Veja o produto
-
IntelliBridge Enterprise
- A single Philips interoperability point reduces complexity
- Standards-based HL7 data exchange supports different systems
- Automation features reduce effort
- Research data can be easily accessed
Veja o produto
-
IntelliBridge EC10
How do you bring together key patient information in care environments from diverse equipment? The IntelliBridge EC10 module consolidates data from bedside devices to display on IntelliVue patient monitors and transmit to clinical and hospital information systems.
Veja o produto
-
IntelliBridge Enterprise
Philips IntelliBridge Enterprise provides a single, standards-based point of interoperability between your Philips clinical systems and your enterprise information systems, while reducing complexity and cost in your healthcare environment.
Veja o produto
